Commercial

Watertec can provide packaged Reverse Osmosis systems with capacities ranging from 800 GPD to 12,000 GPD and up. These systems are ideal for small and medium-sized water stores.

Wherever good water purity is required, our systems will typically output water in the 2 to 10 PPM TDS range. This assumes an input water TDS under 1000 PPM.

In order to produce a product which meets the required water quality standards, commercial Reverse Osmosis systems must integrate various processing stages. The following chart describes these stages.

The equipment required for these various stages can be purchased "stand-alone", or separately, if needed. More usually, and more economically, we will supply an integrated, or "turn-key" system, in which the needed stages and equipment are pre-connected and tested.

The proper preconditioning of your water is critical to the smooth and safe operation of your business. Improperly treated input water can cause serious damage to the various components of your reverse osmosis system, and would surely compromise the quality of your product water.

A complete analysis of your incoming water supply is essential. This will determine what elements are present and what pre-treatment is necessary to remedy any problems.

A typical standard preconditioning package consists of:

  • Multi-media filter to remove sediment and particulate matter
  • Water softener to eliminate excess mineral content
  • Carbon filter to remove any organic chemicals (chlorine, pesticides, etc.)

These systems are available "stand-alone" or as part of a "turn-key" package.

In some cases, additional preconditioning may be needed. For example, the presence of bacteria or iron in the incoming water would require treatment with ultraviolet light and specialized iron filters, respectively.